voidq.xyz is a Fediverse instance that uses the ActivityPub protocol. In other words, users at this host can communicate with people that use software like Mastodon, Pleroma, Friendica, etc. all around the world.
This server runs the snac software and there is no automatic sign-up process.
A Measurement Study on the Adoption of Pledges and Unveils in the OpenBSD Operating System https://lobste.rs/s/sglhvg #openbsd #security
https://arxiv.org/pdf/2607.03056
A Final Return for OpenBSD Anti-Return-Oriented Programming Mitigations https://lobste.rs/s/xclcel #pdf #openbsd #security
https://papers.ssrn.com/sol3/papers.cfm?abstract_id=6869668
Mark Kettenis added support for heartbeat blinking LEDs based on system load averages to OpenBSD/arm64 and OpenBSD/riscv64 boards.
kettenis@ modified src/sys/*: Implement the machdep.led_blink sysctl on arm64 and riscv64 and add support for it to gpioleds(4). Enable gpioleds(4) on riscv64.
Similar functionality also exists on sparc64 and HP PA-RISC machines.
The paper presents a longitudinal measurement study on the adoption of the pledge and unveil system calls in OpenBSD. These system calls are used to sandbox programs and libraries. Given a dataset covering 19 releases, many programs and libraries were modified to use the system calls already before their introductions in official releases.
J. Ruohonen et al, "A Measurement Study on the Adoption of Pledges and Unveils in the OpenBSD Operating System"
I released a small Emacs major mode and Flymake backend for cwmrc(5), which is a popular window manager configuration format on OpenBSD
https://codeberg.org/gemmaro/cwmrc-mode
#Emacs #Flymake #cwm #OpenBSD
Dog tired from being up very early to watch the England game but still managed to trouble shoot server problems after the power cut.
Firstly the actual Proxmox server doesn’t like DHCP setting the IP address. If you are going to use it then it’s the Virtual Bridge that gets an address, not the NIC. And you’ll need to get the DHCP lease manually.
My dhcpd.conf and unbound.conf files are a record of the truth. And I’ve worked hard at maintaining them.
Secondly I hadn’t enabled httpd and it had been a very long time since the #OpenBSD box was rebooted.
Lessons learnt.
OpenSSH 10.4/10.4p1 released! https://www.undeadly.org/cgi?action=article;sid=20260706190144 #openbsd #openssh #ssh #security #cryptography #secureshell
Latest 𝗩𝗮𝗹𝘂𝗮𝗯𝗹𝗲 𝗡𝗲𝘄𝘀 - 𝟮𝟬𝟮𝟲/𝟬𝟳/𝟬𝟲 (Valuable News - 2026/07/06) available.
https://vermaden.wordpress.com/2026/07/06/valuable-news-2026-07-06/
Past releases: https://vermaden.wordpress.com/news/
#verblog #vernews #news #bsd #freebsd #openbsd #netbsd #linux #unix #zfs #opnsense #ghostbsd #solaris #vermadenday
Latest 𝗩𝗮𝗹𝘂𝗮𝗯𝗹𝗲 𝗡𝗲𝘄𝘀 - 𝟮𝟬𝟮𝟲/𝟬𝟳/𝟬𝟲 (Valuable News - 2026/07/06) available.
https://vermaden.wordpress.com/2026/07/06/valuable-news-2026-07-06/
Past releases: https://vermaden.wordpress.com/news/
#verblog #vernews #news #bsd #freebsd #openbsd #netbsd #linux #unix #zfs #opnsense #ghostbsd #solaris #vermadenday
@mvg both deadbeef and audacious are solid choices for audioplayer on various OS, imo. Used audacious on Linux and it's my goto audioplayer now on OpenBSD and FreeBSD.
What are you looking for when you say you are missing foobar2k?
FYI: And there's also strawberry [1].
[1] https://www.strawberrymusicplayer.org/
/e: fooyin as alternative already mentioned
ymmv
#Linux #RunBSD #FreeBSD #OpenBSD #Unix
Can you guess when I activated ActivityPub relays on this #GoToSocial instance? BTW, although running on #OpenBSD, cpu and memory usage are still chilling.
@freezr on #OpenBSD, you can enable it using wsconsctl. On #FreeBSD, you may have to use an X11 config https://wiki.freebsd.org/SynapticsTouchpad
I particularly liked this sentence:
"cwm is the only one amongst the minimalist window managers that has managed to make me think the least."
Whether you agree or not, it's an interesting way to think about window managers—not in terms of features, but in terms of cognitive load.
Worth the two-minute read.
https://williamjansson.com/posts/cwm/
For $REASONS, I took my (old) #Lenovo Ideapad S10 out of the box and installed
#OpenBSD 7.9/i386 on it. Turns out... it installs and runs. But the only graphical Web browser I could use is Dillo; which can display DuckDuckGo but not Phanpy or my Bank User Portal. So I don't expect to go very far there. Also, even with hw.perfpolicy set to auto, the fan never stops blowing and making some annoying noise (although CPU is 40 degC).
Maybe I'll try some i386 Linux distro there to see what happens. Maybe it'll go back to its box until the Zombie Apocalypse and the need for 2W TDP CPU happen. Or until I need a 1024x600 10" tmux terminal... I could actually take it on the road where the P14 is too big and the iPhone is a bit too small...
And BTW, in case whatever, the dmesg is here https://dmesgd.nycbug.org/dmesgd?do=view&id=9039 :)
PS: While writing this post, the fan finally stopped blowing. Not sure why as temperature is still 40 degC. Anyway.
done some "pkg_add -u" maintenance on Tianve, my OpenBSD 7.9 box.
All is up to date now and well. Thanks to all working on the BSDs for this smooth experience!
https://mastodon.bsd.cafe/@Tionisla/116636336058010823
#RunBSD #OpenBSD #FishLinux #BSD #UNIX
Secondary: "Tianve" - HP-250 G3
Operating System: OpenBSD 7.9 amd64
Desktop: LXQT 2.2.0
Windowmanager: XFWM4
Qt Version: 6.10.2
Graphics Platform: X11/xenocarahttps://bsd-hardware.info/?probe=23dc29b97f
#runbsd #openbsd #fishlinux #unix #foss #lxqt #desktop #screenshot #shareyourdesktop
ESS9038K2M 32-bit
up to dsd256, pcm up to 32b/768kHz
I only now notice that my "What has (can) the EU Cyber Resilience Act done (do) for you?" article, in its tracked incarnation https://bsdly.blogspot.com/2026/06/what-has-can-eu-cyber-resilience-act.html made it onto @vermaden's Valuable news: https://vermaden.wordpress.com/2026/06/29/valuable-news-2026-06-29/ #cra #cybersecurity #cyberresilience #development #security #freesoftware #libresoftware #openbsd #netbsd #freebsd #bsdcan #eurobsdcon
It would be interesting to trace the relationships, if any, between the twain.
Here's something for your doco: Pendleton's actual shar posting to comp.unix.wizards in 1988, complete with UUCP bang paths in the signature block.
https://groups.google.com/g/comp.unix.wizards/c/HVObC4kIJ9g/m/q6PYo0bEUL8J
Notice that Pendleton did VMS emulation before emacs.
https://groups.google.com/g/comp.unix.questions/c/zvywB_vQt2s/m/bg2TiwXL8aUJ
Also note that the BSDs have cfmakeraw(3) available in the C library.
#readline #ile #Unix #emacs #VMS #termios #FreeBSD #OpenBSD #NetBSD
Great news! My presentation for #EuroBSDCon has been accepted!
Expect a mix of disasters, horror stories, recoveries, BSDs, and one very, very long day.
Stay tuned!
#EuroBSDCon2026 #BSD #RunBSD #FreeBSD #NetBSD #OpenBSD #Linux
Reading the dense feature-full #GoToSocial 0.22.0 release notes while Go compilation and Yarn whatever happen on the sideway SSH connection to the #OpenBSD server...
https://codeberg.org/superseriousbusiness/gotosocial/releases
If you can read this message from your own rock on the Fediverse ocean, it means this #GoToSocial bush has been properly upgraded to v0.22.0 Shrubby Sloth 🌿 while running on the unsupported #OpenBSD 7.9/amd64 platform using NOWASM and exposed through #relayd and #httpd.
The relay features have not been enabled, yet. Because I'd rather check that everything else work first. But they will, soon.
it detects the intel hd audio and attaches azalia(4), but only the internal realtek alc257 codec is found.
there is no hdmi audio codec, no audio1, and mixerctl -a only shows the internal speaker/headphone outputs. the external display works over hdmi, but there is no way to select hdmi audio because no hdmi audio device is detected.
is hdmi audio expected to work with openbsd 7.9? if it should work, are there any additional diagnostics steps i should try?
Both relayd(8) and httpd(8) now have the “secure” list of allowed crypto methods for HTTPS, which include TLSv1.3 and the TLSv1.2 AEAD cipher suites. The previous list was “HIGH:!aNULL” which contain non-perfect-forward-security methods and this change may cause old clients to not be able to connect.
relayd(8) and httpd(8) TLS settings update. #openbsd
https://undeadly.org/cgi?action=article;sid=20260629165750